POSline SM2430, Руководство пользователя

Страница: 3 / 25

ii
Laser Safety
The Dual-Laser Omnidirectional Vertical Scanner complies with safety standard
IEC 60825 for a Class I laser product. It also complies with CDRH as applicable
to a Class IIa laser product. Avoid long term staring into direct laser light.
Radiant Energy: The Dual-Laser Omnidirectional Vertical Scanner uses two
low-power visible laser diodes operating at 650nm in an opto-mechanical scan-
ner resulting in less than 3.9µW radiated power as observed through a 7mm
aperture and averaged over 10 seconds.
Do not attempt to remove the protective housing of the scanner, as unscanned
laser light with a peak output up to 0.8mW would be accessible inside.
Laser Light Viewing: The scan window is the only aperture through which
laser light may be observed from this product. A failure of the scanner motor,
while the laser diode continues to emit a laser beam, may cause emission lev-
els to exceed those for safe operation. The scanner has safeguards to prevent
this occurrence. If, however, a stationary laser beam is emitted, the failing scan-
ner should be disconnected from its power source immediately.
Adjustments: Do not attempt any adjustments or alteration of this product. Do
not remove the protective housing of the scanner. There are no user-service-
able parts inside.
Caution: Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous laser light exposure.
Optical: The use of optical instruments with this product will increase the eye
hazard. Optical instruments include binoculars, magnifying glasses, and micro-
scopes but do not include normal eye glasses worn by the user.