TUNER
29
Choosing channels from the channel list and
tuning to them
The channel list contains the channels from
various categories that can currently be received.
It is sorted by channel numbers and in addition to
the channel names, also contains the categories
to which the channels belong.
The satellite radio channels are divided into
various categories.
These categories
allow
the channels to be divided into genres such
as "Decades", "Rock", or "Sports".
By selecting specific categories, you can
determine the composition of the channel list
yourself and make the list easier to search.
To find out more about selecting individual
categories, please refer to the section
"Selecting categories for the music search"
on page 30.
1.
Set "
SAT
" mode.
2.
Press the
i
button or touch the tab
of the same name in the header.
3.
Select "
Channel list
".
The channel list is opened. The channel
currently tuned to is highlighted in color.
4.
Select the desired channel.
Storing channels on the station buttons
in the preset memories
In each of the following preset memories there are
six memory locations available where you can
store stations:
–
SAT 1
,
SAT 2
,
SAT 3
and
MIXED
.
In contrast to all other preset memories, in
the
MIXED
preset memory you can store
stations and channels in different modes. This
means you can store stations from FM mode
and AM mode as well as channels from
SAT
mode here.
1.
Select "
Preset memory
".
The available preset memories are listed.
2.
Select the desired preset memory.
Manually storing channels
1.
Set "
SAT
" mode.
2.
Tune to the channel.
3.
Set the preset memory if applicable.
4.
Press and hold the station button for
a few seconds.
As soon as the channel is stored on the station
button, the name of the channel is displayed
on the button.
Storing channels from the channel list
1.
Set "
SAT
" mode.
2.
Press the
i
button or touch the tab
of the same name in the header.
3.
Select "
Channel list
".
4.
Select the desired channel by holding it for
a few seconds.
The station buttons are displayed and the
channel previously selected is shown in the
information window.
5.
Select a station button to store the channel
on it.
