NAVI
141
Map display in landmark navigation
The individual landmarks are shown as flags in the
map display:
– Orange-colored flags: next landmark
– Blue flags: landmarks that have not yet been
driven to
– Checked flag: the current destination
landmark.
The routes between the landmarks are shown with
a blue line.
Additionally, a compass is displayed at the top left
to aid orientation.
When a landmark is reached, the system outputs
the message "Landmark XX reached".
Recording a trip section (trace)
With off-road navigation you can record a section
of a trip, even in undigitized areas. You do this by
setting navigation points.
A section of this type is called a trace.
Traces can be recorded in off-road mode while
route guidance is active.
The maximum number of traces that you can
record and store in the destination memory is
15.
Traces are not stored in the list of previous
destinations.
Map display during trace recording
During trace recording, the recorded route of the
trace is shown as a blue line in the map display.
Map display when following a trace
When you drive a recorded trace, the route ahead
is shown in the map in orange and the route
already covered is shown in gray.
