136
NAVI
Stopovers (tour)
You can enter up to four stopovers during an
active navigation session and arrange them in any
order. The route is recalculated and the
destinations are then called at in a so-called tour.
As soon as a stopover is approached as an active
destination, it is also displayed in the list of
previous destinations.
The complete tour is displayed in the form of a list
of destinations, with the currently active
destination at the top of the list.
The main destination of the tour is indicated by a
black and white destination flag
and is the last
entry in the list.
If the active navigation session is an off-road
session, the "
Stopovers
" and "
As stopover
"
menu items are replaced with the "
List of
landmarks
" and "
As landmark
" menu items.
To find out more about off-road navigation,
please refer to the section "Off-road
navigation" on page 139.
Displaying destinations
1.
Press the
f
button.
2.
Press the
i
button or touch the tab of
the same name in the header.
3.
Select "
Stopovers
"
> "
Show destination list
".
The destination list is opened.
Entering stopovers
By entering an address
1.
Press the
f
button.
2.
Press the
i
button or touch the tab of
the same name in the header.
3.
Select "
Stopovers
"
> "
Add
"
> "
Enter address
".
The address input menu is opened.
4.
Enter the desired address.
5.
Select "
Accept
".
If you have already entered at least one
stopover, a destination list is opened where
you can define the position of the stopover you
are in the process of entering.
6.
Position the stopover by selecting the "
empty
"
list entry at the desired position in the list.
From the destination memory
1.
Press the
f
button.
2.
Press the
i
button or touch the tab of
the same name in the header.
3.
Select "
Stopovers
"
> "
Add
"
> "
Stored destinations
".
The personal destination memory is
opened.
4.
Select the desired destination.
The destination is accepted as a stopover.
From the list of previous destinations
1.
Press the
f
button.
2.
Press the
i
button or touch the tab of
the same name in the header.
3.
Select "
Stopovers
"
> "
Add
"
> "
Previous destinations
".
The list of previous destinations is
opened.
4.
Select the desired destination.
The destination is accepted as a stopover.
