Porsche PCM3 Скачать руководство пользователя

Страница: 1 / 184

Dear Owner,

in this operating manual you will learn about the

various functions of the PCM

(Porsche

Communication Management)

and the control

options. Get acquainted with the operation of your

PCM while the vehicle is at rest. In order to take

advantage of its expanded scope of features, your

full concentration is required during this learning

process. In addition, attempting to drive while

learning these functions will draw your attention

away from the road, thus putting yourself and

others at risk of an accident.

On-board literature

Keep the on-board literature in the vehicle at all

times and if you ever come to sell your vehicle,

please hand it over to the new owner.

Suggestions

Do you have any questions, suggestions, or ideas

about your vehicle or the on-board literature?

Please write to us:
Dr. Ing. h.c. F. Porsche AG

Vertrieb Customer Relations

Porschestraße 15-19

71634 Ludwigsburg Germany

Orientation aids in the operating manual

This operating manual contains four orientation

aids to help you quickly locate the information you

require. They are each shown against a yellow

background.
The

master table of contents

offers you an

overview of the structure of the entire manual.
In the

section table of contents

you will find

detailed listings of the individual topics.
The

index

enables you to find the various topics

with the help of keywords.
At the back of the operating manual you will also

find a

glossary

, where the terms and

abbreviations used are explained.

Equipment

There may be some differences in equipment and

technology with respect to the illustrations and

descriptions due to the ongoing further

development of the systems and the different laws

in individual countries.
The equipment versions shown are not always

included as standard. Some of the functions

described in this operating manual are optional

equipment and may not be available in your PCM.

If this is the case, the relevant menu items will not

be available to you.

WARNING!

For your own protection and longer service life

of your car, please follow all operating

instructions and special warnings. These

special warnings use the alert symbol,

followed by the words Danger, Warning,

Caution, & Notice. These special warnings

contain important messages regarding your

safety and/or the potential damage to your

Porsche. Ignoring them could result in serious

mechanical failure, serious personal injury or

death.

Содержание PCM3

























































































































































































Результаты поиска

Содержание PCM3

Отзывы:

Похожие инструкции для PCM3

Бренды по названию

Популярные бренды

Porsche PCM3, Руководство пользователя

Результаты поиска

Содержание PCM3

Отзывы:

Похожие инструкции для PCM3

Бренды по названию

Популярные бренды