Porsche 928S 1983, Руководство пользователя

Страница: 85 / 110

If your vehicle is equipped with asymmetric-
al dipped beam headlights, and you travel
abroad, where the traffic drives on the other
side of the road, you should stop at the bord-
er, and blank off the prism section of the
light diffusing lens with opaque adhesive
strip. The dipped beams will then be sym-
metrical, and will not dazzle oncoming dri-
vers.
Manual operation of the headlights
If, by reason of a malfunction in the headlight
elevating motor, the headlights cannot be
raised or lowered, the knob on the driveshaft
of the elevating motor can be manually turn-
ed, to raise or lower the headlights. The
elevating system is so designed that, to
raise or lower the headlights, only one turn
to the left with the knob is necessary.
Do not try to turn the elevating motor knob
when the headlights are functioning nor-
mally from the light switch as they should,
because of the danger of being injured.
By virtue of the switching principle, the ele-
vating motor drives the elevating mechan-
ism another half a turn (180°) that is to say
that after several turns of the knob a contact
is closed so that when the headlights are
functioning normally, they go up and come
down immediately.
83