Porsche 928S 1983, Руководство пользователя

Страница: 61 / 110

Advice on maintenance
and breakdowns
It is strongly recommended that all the ne-
cessary work on your vehicle be carried out
by authorised workshops. The training and
experience of the workshop personnel, the
technical information from the manufacturer
and the special tools and apparatus provide
a good basis for the correct treatment of
your Porsche.
When, however, you wish to work on your
vehicle, this should only be done with great
care. Only then, is the safety of your vehicle
ensured. The engine should always be turn-
ed off and cool, before starting work on it.
Before undertaking an oil-change on your
vehicle, you should know how to dispose of
the old oil. Under no circumstances should
it be tipped into the drainage system, over
the ground or into the waterways. If you
cannot dispose of the oil properly, then let
your workshop do the oil-change.
Tool-kit
The tool-kit is in the tray fitted to the back panel
of the vehicle. To remove the panel covering
the tool-kit, both knobs must be turned through
90°. It contains all the tools necessary to re-
medy small faults and to enable you to do your
own servicing. The jack is by the spare wheel.
Some lands require that additional tools and
replacement parts be carried in the vehicle.
Please enquire before driving abroad.
The jack supplied with the vehicle should
only be used when changing the wheels on
the vehicle. When working under the
vehicle, it should be supported on purpose-
made stands for safety.
59