Poolspa VICTORIA SPA, Инструкция по установке и эксплуатации

Страница: 15 / 28

15
1.9. Disinfection
Disinfection process in the SPA Victoria, is ozone based. Ozone is used during fi ltration. Additionally,
the bath is equipped with a START SET of measurement and treatment agents for pH correction and
disinfection with active oxygen (more information in part 1.11).
1.10. Thermal cover (additional option)
The SPA Victoria can be optionally provided with a thermal
cover.
We recommend to order the cover in cases when:
- the bath is going to be used outdoors, i.e. in a garden (the
cover prevents the water from excessive cooling down and
keeps the bath clean as well as preventing excessive hea-
ting of the bath perimeter by sun rays),
- when the bath is going to be used very frequently indo-
ors (the cover serves to prevent the water from excessive
evaporation).
Fig. 1-10. Thermal cover for SPA Victoria
If the bath is to be exposed to operation in direct sunlight, it is recommended to
use the thermal cover after taking a bath, to prevent damage resulting from sun-
light heat.
1.11. Measurement and treatment formula set
Before the fi rst bath and depending on how frequently the SPA Victoria bath is
used, please check the water pH with the enclosed Dinofresh/pH Tester!!! (Mini-
mum once every 2 weeks).
pH measurement:
• rinse a test container and fi ll to the 10 ml mark with pool water,
• add 1 PHENOLRED (fi g. 1-11) tablet to the container and close the plug,
• shake the container and dissolve the tablet,
• compare the test water colour with the colours in the column on the left and read the pH of the
water sample,
• all pH values below 6,8 make the water turn yellow,
• all pH values above 8,2 make the water turn red,
• ideal values range from 7,2 to 7,6.
Dinofresh measurement:
This is a measurement of the active oxygen concentration contents, informing about the oxygen
content level in water.
• Rinse a test container and fi ll to the 10 ml mark with pool water.
• Add 1 DPD no 4 tablet to the container and close the plug.
• Shake the container and dissolve the tablet.
• Compare the colour of the solution with the colours in the column on the right to read the Dinofresh
value of the water sample.
• The recommended values range from 5,0 to 8,0 mg/litre.