background image

12

  

1.6. 

Hydromassage

There are water and air massage systems installed in the bath.

1.6.1. Hydromassage (whirl bath)

Hydromassage is the pressure on defi ned muscles exerting by stream of water or stream of air 
and water. Water or  air and water at high pressure bring out from regulated jets and hit on body 
surface. It tones and relaxes the skin, at the same time massaging and cleaning it. Hydromassage 
is recommended for anybody with spine, arthritic or muscle pains, respiratory system diseases or 
gynaecological problems.

Water massage system (hydro-massage) is made of the following elements:

- a set of 25 water and air jets, supplying water or a water and air mix of suffi cient speed to the water 
section of the bath;
- a hydromassage whirl pump, enforcing water circulation;
- 2 regulators of air supply to the hydro-massage jets, installed at the edge of the bath; used for
  regulation of massage intensity;
- water suction point.

The water massage intensity regulation is possible by means of aeration regulators located at the 
perimeter of the bath top, by adding air to the water stream coming from the jets. The more air, the 
stronger the stream is. An accurate water massage power regulation can be also made by the jets, 
which is described in detail in part 1.3.

Hydromassage intensity is increased by turning the regulator knobs clockwi-
se (towards the “ON” sign) 

 

Hydromassage intensity is decreased by turning the regulator knobs anti-clo-
ckwise (towards the “OFF” sign) 

 

Fig. 1-3.Massage intensity 

regulator

Each of the regulators is responsible for controlling a different jet section; a detailed breakdown is 
shown on fi g. 1-4.

A

-

fixed mini jets

B

-

fixed ozone mini jet

C

-

4" adjustable rotating stream jets

F

- underground lighting

G

- water suction

H

- control panel

I

- aeration regulators

D

-

4" pulsating stream jets

E

-

4" multi-massage jets

B

F

G

H

I

I

A

A

D

C

C

A

A

C

E

E

D

A

A

A

A

A

A

C A

A

A

A

A

A

G

Fig. 1-4. Location of water jets and aeration control

Содержание VICTORIA SPA





























Отзывы: