background image

8

  

1.4. Ventilation

High water temperature during bathing in the bath (up to 40°C) causes emitting of big amounts of 
steam. An effi cient ventilation system should be provided in the room with the bath. Installing of a 
steam condenser in the room which will maintain constant air humidity will minimize the risk of dam-
pening of walls and ceiling. An air-conditioning system in the building allows for elimination of the 
steam condenser. Such problem does not exist in case of a bath operating in open air conditions.

1.5. Main functions accessible from the electronic control panel.

Victoria SPA control panel

1.5.1. Switching on/off the pump 

 

The hydromassage pump can be switched on/off directly from the electronic control panel. After 

starting the pump, this icon 

1

, appears on the display and after switching it off, the icon disap-

pears.
With the two-gear pump, pressing the button for the fi rst time switches the pump over to a low gear 

(fi ltration; this icon 

1

 blinks on the display). Pressing the button once again switches the pump over 

to a top gear (massage; this icon 

1

 appears on the display). Pressing the same button again swit-

ches the pump off and the icon disappears from the display.
In some cases, the pump automatically switches over to a low gear after connecting it to the power 
supply. This happens during the 

fi ltration

 or the water 

heating process

 in the SPA bath.

The pump working in massage mode have automatic time out (20 minutes) from the last button 
start.

 

 - unavailable

1.5.2. Extra equipment 

 - airmassage (on/off)

1.5.3. Switching on/off the lighting 

Press the button with the lamp symbol on it to switch on the lighting. This icon 

 appears on the 

display. Press the same button again to switch off the lighting, and the icon disappears from the 
display. The lighting switches off automatically after 2 hours from the last pressing of the lighting 
on/off button.

Press and hold this button 

 for more than 5 seconds to view from inside the spa the water tem-

perature and time display projection, to read these data.

Содержание VICTORIA SPA





























Отзывы: