Turn the unit ON
Press the green ON button and the
unit will sound one short beep to
indicate it is on. The alarm siren
will sound when the sensor picks
up any water wave motion.
Therefore you should wait a few
minutes for the water wave to
settle down before turning on the
unit.
If the alarm goes off immediately after you hit this green ON button,
recheck the mounting of the alarm unit. If the unit is not securely
mounted, pushing the control head will cause the alarm to sound off.
If the alarm continues to sound off whenever it is turned on, please
read the Sensitivity Adjust section.
Turn the unit OFF
Press and hold both the green ON and
the yellow RESET button
simultaneously for 3 seconds, until
you hear 5 consecutive beeps. The
unit is now turned OFF.
Reset the unit
Press the yellow RESET button to
turn OFF the siren. This will reset
the unit to the ON state
automatically.
3 seconds