Back up power
The receiver unit is designed
to use a regular alkaline 9V
batter y as back up power
source. To install this back up
battery, remove the 4 screws
and open the battery door.
9V alkaline battery
Back up power
How to connect to your home security system
The remote receiver has a three junction terminal block, so that you
can connect it to your home security system or other third party
safety device. When the receiver receives a RF (radio frequency)
alarm signal, it will activate the terminal block in 3 seconds.
Resetting the receiver within 3 seconds ensures that you will not
activate your home security system.
Loosen the screw at the top and remove the blue cap. Remove the
battery door and loosen the two screws. Open up the box and you
can find a 3 junctions terminal block near the A/C adapter power
jack.
