Sensitivity Adjust
Loosen the two screws on the
bottom of the sensor.
Move the plastic piece with the
pointer pointed to ìHî if you want
higher sensitivity or to ìLî if you
want lower sensitivity. The unit is
preset at factory to ìHî.
If you have to place the unit near
the return, snap the cap onto the
sensor cage facing the direction
of water flow.
NOTE: The deflector will reduce sensitivity.
Test the alarm unit as described in section
4.0 before use
Pool Side Alarm Assembly
The
POOLEYE
pool side alarm comes with a control head and a separate
sensor tube. Before the unit can be used, the two pieces must be
assembled together as follows:
Locate the phone jack at the bottom
of the control head, and a phone
plug coming out from one end of
the sensor tube. Place this phone
plug into the phone jack.
Gently push the tube into the bottom
of the control head. The sensor
tube end should fit snugly into the
bottom of the control head.
