Polytec MSA-600 Скачать руководство пользователя страница 2

Страница: 2 / 99

41793-Man-MSA600-X/-U-

0322

-03en

*41793*

Warranty and Service

The warranty for this equipment complies with the regulations in our general terms and

conditions in their respective valid version.

This is conditional on the equipment being used as intended and as described in these

operating instructions.

The warranty does not apply to damage caused by incorrect usage, external mechanical

influences, or by not keeping to the operating conditions. Do not tamper with the instrument or

modify it without authorization as this will invalidate the warranty.

To return the equipment, always use the original packaging. Otherwise, we reserve the right to

check the equipment for transport damage. Mark the package as fragile and sensitive to frost.

Include an explanation of the reason for returning it as well as an exact description of the fault.

You will find information on troubleshooting in these operating instructions.

Trademarks

Brand or product names mentioned in this documentation could be trademarks or registered

trademarks of their respective companies or organizations.

Name Plates

MSA-I-620 Sensor Head

MSA-F-620-X/-U Front-End

MSA-E-600 Controller

MSA-W-620-X/-U Data
Management System

Содержание MSA-600




































































































Результаты поиска

Содержание MSA-600

Отзывы:

Похожие инструкции для MSA-600

Бренды по названию

Популярные бренды

Polytec MSA-600, Руководство по эксплуатации

Результаты поиска

Содержание MSA-600

Отзывы:

Похожие инструкции для MSA-600

Бренды по названию

Популярные бренды