manualshive.com logo in svg

Polytec MSA-600, Руководство по эксплуатации

Поделиться
Скачать
Polytec MSA-600 Скачать руководство пользователя страница 68

3-44

3 First Steps

3.5.3

Topography Measurement 

Use the MSA-A-TOP Depth Measurement Structure, which is available as an 

option, for a functional test of a topography measurement. Alternatively, you 

can use a different measurement object with a topography structure.

 

 

INFORMATION

For further information, refer to your TMS software manual.

To test a topography measurement with your measurement system, proceed 

as follows:

Prerequisites

1. Mount the system as described in S

ECTION

3.3. Use the 10x interference 

objective for the measurement.

2. Connect up the system as described in S

ECTION

3.4.

Set up depth 

measurement 

structure

3. Place the depth measurement structure under the sensor head and align 

it so that you can read the Polytec lettering on it.

Figure 3.32: Depth measurement structure

Switch on

4. Switch on the data management system and the front-end.
5. To switch on the front-end, turn the key switch on the front of the front-end 

to position 

I

.

The sensor head and the controller switch on with the front-end as the 

mains cable of the front-end is plugged into the master socket, the 

mains cable of the controller into the slave socket.
If the controller does not automatically switch on, refer to S

ECTION

5.1 

for troubleshooting.

 

 

INFORMATION

The instrument does not reach its optimal metrological properties until a 

warm-up period of approx. 30 to 60 minutes.

A

For 50x interference objective

B

For 10x and 20x interference objective

C

For 2.5x, 4x and 5x interference objective

&

%

$

Содержание MSA-600




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды