Page 11 of 23
© Copyright 2006, Oregon State University Extension Service
http://extension.oregonstate.edu/esoc/ectu/
Using the directory to make a call:
Each PolyCom VSX 5000 device has a directory which works just like a
phonebook. You can store numbers in it so that you do not have to
remember them later. You can add as many new numbers as you wish.
This section will tell you how to make a call to an IP number using your
directory.
From the main screen use the
red down arrow
near the top of the remote control to highlight the
directory button.
Press the
red enter
button
near the top of the
remote control to open the directory. From here
you can see a list of all the phone numbers you have
stored in the directory. Use the
red arrows
to
scroll through the list of names in the directory.
Highlight the name you wish to call and press the
green Call
button
at the top of the remote
control. At this point you will see the same screen
as if you dialed the number yourself.
The video conference device you are calling must be turned on before
you can call it. If you have trouble connecting ensure the device you
are calling is on by using the telephone to call someone at that location.
