If you installed MSDE as a named instance, the
LoginMode
subkey is located in the
following registry subkey:
HKLM\Software\Microsoft\Microsoft SQL Server\
Instance
Name
\MSSQLServer\LoginMode
To change the value of
LoginMode
to 2, follow these steps:
1. In Control Panel, open the Services tool to stop MSSQLSERVER and all other
related services (such as SQLSERVERAgent)
2. To open Registry Editor, click
Start
, click
Run
, type regedt32, and then click
OK
.
3. Locate either of the following subkeys (depending on whether you installed
MSDE as the default MSDE instance or as a named instance:
HKEY_LOCAL_MACHINE\Software\Microsoft\MSSqlserver\MSSqlServer\
-or-
HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL
Server\
Instance Name
\MSSQLServer\
4. In the right pane, double-click the
LoginMode
subkey.
5. In
the
DWORD Editor
dialog box, set the value of this subkey to
2
, make sure
that the
Hex
option is selected, and then click
OK
.
6. Restart the MSSQLSERVER service for this change to take effect.
- Adapted from Microsoft Knowledge Base Article –319930 -
•
Polycom Data Store Installation.
Once the above requirements are fulfilled, the Setup application
will launch the Global Management System installer. If Polycom Datastore is not detected, the
installer will prompt you to install Polycom Datastore.
o
The Data Store installation will prompt the user to install the JBDC drivers if it detects that
the drivers don’t exist. Follow the screen instructions (
Figure 2
). There is no need to exit
the current installation at this time.
o
Once the “Get JBDC Drivers” button is clicked, the installation will download the Microsoft
SQL Server 2000 Driver for JBDC-Service Pack 1 “setup” utility from this URL
http://download.microsoft.com/download/3/0/f/30ff65d3-a84b-4b8a-a570-
27366b2271d8/setup.exe
.
o
If this link does not work, the end-user will need to go to Microsoft's website and search
for the JDBC Drivers manually:
1. Without exiting the installation, open an internet browser and go to:
http://download.microsoft.com
2. Perform a search for the keywords "SQL JDBC DRIVER"
3. Select the result for "Microsoft SQL Server 2000 Driver for JDBC - SP1"
4. Download the Windows executable, "setup.exe", rather than the Unix
"mssqlserver.tar" file.
5. The driver version should be 2.2.0029 or later.
6. Install the drivers by double-clicking on the "setup.exe" that was just
downloaded.
7. Begin (or continue) the installation.
10/6/2004
Page 7 of 13
Global Management System 7.0.0
