POLTI Vaporetto SMART 100_B, Инструкция по эксплуатации

Страница: 26 / 92

4. CLEANING FLOORS
Before starting to steam clean, it is good
practice to have previously swept or
vacuumed the floor.
4.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
4.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
4.3 Attach the supplied cloth to the floor
brush. To make it easier to attach, the cloth
has an easy lock/release system to avoid
having to bend over and use your hands. Just
place the cleaning side of the cloth on the
floor and rest the brush on top (12).
4.4Adjust the intensity of the steam by
turning the adjustment knob (7); for this type
of surface we recommend Medium level
steam.
4.5 Deactivate the steam lock (4) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose (4).
4.6 Clean the floors by moving the brush.
The brush has a flexible joint that makes it
possible to reach the most difficult-to-reach
areas (under furniture, under beds, etc.).
The brush has bristles built into the rear side
(13) ideal for removing the most stubborn
dirt. To use, return the handle to the vertical
position locking the brush, then tilt until the
brushes are touching the floor and scrape off
the dirt.
At the end of the cleaning operations, the
cloth can be removed from the brush by
pressing with a foot on the tab of the cloth
and pulling upwards on the extension tubes
connected to the brush.
5. CLEANING CARPETS AND RUGS
5.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
5.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes. Insert the brush with the cloth
attached (see point 4.3) in the special frame
for sliding on rugs (14).
5.3 Adjust the intensity of the steam by
turning the adjustment knob (7); for this type
of surface we recommend Medium level of
steam.
5.4 Deactivate the steam lock (4) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose (4).
5.5 Pass the floor brush over the surface.
6. CLEANING GLASS, WINDOWS
AND TILES
6.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
6.2 Adjust the intensity of the steam (7) with
the special handle; for this type of surface we
recommend Medium level of steam.
6.3 Ensure that the steam lock on the handle
is deactivated (4).
6.4 To clean windows and mirrors, steam the
surface thoroughly to dissolve the dirt.
Connect the small brush with window cleaner
to the flexible hose and go back over the
surface to remove the dirt, without
dispensing steam. The extension hoses can
be connected to the flexible hose to reach
high surfaces.
Before using the appliance on delicate
surfaces, ensure that the part in contact
with the surface is free from foreign bodies
that could cause scratches.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Do not use the appliance
without the cloth.
WARNING: For additional safety, test steam
delivery on a hidden area, leave the steamed
area to dry to ensure that no changes in co-
lour or deformations have occurred.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
After which, remove the frame by resting the
foot on the relative symbol and then remove
the cloth by holding it firm with the foot
resting on the tab and pulling the brush up.
WARNING: To clean glass surfaces during
cold weather, preheat the windows starting
to steam from a distance of about 50 cm
from the surface.
E
N
G
L
IS
H
| 26 |