23
COMMUNICATION MODE WITH PC. INDICATOR PARAMETERS
ATTENTION! Operation in the communication mode with a PC is intended for a trained user
or the user-administrator.
Access to the communication mode with a PC for an ordinary user is protected with the
password.
Communication mode with a PC by IR communication channel
For indicator operation in this mode a PC with IrDA should be used or an adapter of the IR
communication channel supplied along with the indicator by an individual order (see the complete set) and
the user’s program (
ПП
)
РМ
17
ХХ
_14
ХХ
, supplied at the CD.
Minimum requirements for the computer and its software:
-
Р
100;
-32
М
byte ROM;
-Windows 98, 2000, XP (small print in Windows set);
-20
М
byte of free space on HD plus the free space for the formed data base;
-monitor resolution 800
х
600;
-IrDA.
If the built-in IrDA is unavailable in the computer, the IR communication channel should be used
which is to be supplied as per individual order. For connection of the adapter of the IR communication
channel the adapter cable is to be linked with a PC communication port.
For PP setting a CD with the software should be used included to the supply set.
A
SETUP.EXE
program is to be started at the computer by using the installation document -
install.doc
. (the automatic start-up is supported).
Operation with the PP is described in th
е
Help site in the attached textual document which are
installed along with the user’s software.
For switching on the communication mode with a PC an indicator should be
placed at the distance of 10-12 cm from an adapter window of the (IrDA)
communication channel, and a LIGHT push button should be pressed. As soon as the
indicator enters the mode of information exchange, “Ir” message will be illuminated on
the LCD.
*Note
–
The indicator is automatically switched off ( "OFF" note is indicated on the LCD)after
reading the indicator operation history in the mode of communication with a PC.
INDICATOR PARAMETERS
Indicator parameters are set up in the communication mode with a PC user-administrator (the access is
protected with a password).
The manufacturer sets up the access password – 1.
The indicator is supplied to the user along with initial settings which comply with the chart of orders
(see attachment A).
During operation in the communication mode with a PC the user-administrator may fulfill the
following actions:
In the information system
- to register belonging of the indicator to a specific user;
- to remember the time of indicator sending and returning;
-
*
to read information from the indicator storage, including the history of its operation:
-the indicator number;
-time of indicator on/off;
-current MED value by the gamma channel via the consecutive time interval set up by
the user;