10
1 (MODE)
– a push button for :
-switching on the device;
-selection of operation modes;
-recalibration by the background
level
-change of parameters in the mode
of settings
2
(LIGHT)
– a push button for:
-switching
on
the
LCD
illumination;
-switching
on
The
IR
communication with the PC;
- change of parameters in the mode
of settings
-switching off the device
3
- a window of the IR transmitter-
receiver
4
– a LED
Figure 2
5 –
the upper LCD line is intended for display of:
•
count speed, s
-1
(in the searching mode)
•
digits from 0 to 9 (in the searching mode);
•
MED values of gamma radiation,
µ
Sv/h (
µ
R/h) (in the mode of MED measurement);
•
information "test", "CAL", "OL", "OFF", "
Р
-1.3" etc.;
•
an indication type (sound or vibration)
6
– the analogue scale consisting of 19 segments is intended for:
•
time indication to completion of the internal processor tests – reduction of the number of segments up
to their disappearance;
•
time indication to completion of calibration completion by the background level – increase of the
number of segments up to the full scale filling;
•
visual display of the MED level in the searching mode 0-9
7
– a mark of supply cell discharge " ";
8
– marks indicating the paramemetrs of gamma, neutron
2
1
emissions
9
– an indicator of the size of the induced value
•
«s
-1
» – in the mode of searching the gamma radiation;
•
«s
-1
» – in the mode of searching the neutron
2
radiation;
•
«
µ
Sv/h» – in the MED indication mode (option "
µ
R/h")
10
– the low LCD line, intended for:
2
РМ
1703GNO,
РМ
1703GNA,
РМ
1703GNB