17
INDICATION MODE OF AVERAGE SPEED OF GAMMA RADIATION INDICATION
DURING ACCUMULATION (only for
РМ
1703
М
-
О
1)
In this mode in the upper line of LCD a
γ
is blinking, and the average count time is
shown during accumulation time (s
-1
).
The lower LCD line shows the value of the statistical error of the average count speed
in percents.
For reset of the current value of impulse counting and accumulation renewal a MODE
button should firstly be pressed and retained by staying in this mode.
MODE OF NEUTRONS REGISTRATION
2
1
In this mode the number of accumulated count impulses is indicated in the LCD upper line:
ХХХХ
– in case of indication by the value of 9999 impulses
Х
.
ХЕХ
– in case of indication above 9999 impulses, wherein
Х
– any figure
from 0 to 9,
ЕХ
is 10
х
.
n
mark is blinking in the lower line of the LCD and the time of impulses
accumulation is indicated in hours.
INDICATION MODE OF AVERAGE SPEED OF NEUTRON RADIATION INDICATION DURING
ACCUMULATION
2
In this mode in the upper line of LCD the average count time is shown during accumulation time (s
-1
).
The lower LCD line shows the value of the statistical error of the average count speed in percents.
For reset of the current value of impulse counting and accumulation renewal a MODE
button should firstly be pressed and retained by staying in this mode.
FAST SWITCHING OF SOUND OR VIBRATING INDICATION
In this mode the user may check the preset indication or select another indication type (sound – (Aud
-on) or vibrating – (Vibr-on)).
In order to enter this mode a MODE push
button should be pressed for a short time
in any operating mode
, provided that
button pressing has not been effected
during the last 15 seconds
. The current
indicating type shall be displayed on the
device LCD. Selection (switching) of the
required indication type is carried out by
short pressing of LIGHT PUSH BUTTON.
It should be borne in mind that the user may change the sound volume in the mode of settings.
2
РМ
1703GNO,
РМ
1703GNA,
РМ
1703GNB