Poettinger NOVACAT 225 H, Руководство оператора

Страница: 29 / 54

0200-GB ENTLASTUNG_379
GB
MAINTENANCE
- 29 -
Check initial spring tension.
1. Mount the implement onto the tractor
- see chapter “Mounting onto Tractor”
2. Lower cutter bar to the ground
- the ground bearing load of the cutter bar outside right should be
about 75 kg.
Alter spring tension
1. Swivel cutter bar up into the vertical position
2. Make sure the safety hook has engaged!
- see also chapter “Transport position - 2”
3. Pin bolt (18) in the relative position (a, b, c), see also
Table.
Normal position of the pin bolt (18) is if the half-bolt is in the bore
(17a).
The pin bolt (18) can additionally be set up in intermediate positions.
These intermediate positions can then be selected if by setting out
in positions a, b, c no satisfactory bearing pressure can be achieved
for the mowing bar.