Poettinger MULTICAT 9000, Руководство по эксплуатации

Страница: 15 / 35

(374) 9800-GB EINSATZ
- 15 -
PUTTING INTO OPERATION GB
1)
optional equipment
TD 79/98/43
Mower unit with Conditioner 1)
1. Check condition of V-belts.
Replace worn out and damaged V-belts!
2. Check V-belt tension!
• Adjust the tensioning screw (S)
appropriate.
3. Check V-belt tension!
• The compression spring should be pretensioned to 115 mm .
This setting is achieved by appropriately turning nut (M1).
• The 15 mm gap is set by appropriately turning nut (M2).
Operation
1. Adjust cutting height by turning upper link spindle (inclination
of the cutting discs max. 5
°
).
2. To mow, gradually supply power to the p.t.o. before entering
the crop and bring the mowing discs up to full revs.
Smoothly increase the p.t.o. speed, in order to avoid noises in the free-
wheel conditioned by the system.
- Adjust travel speed to terrain and crop.
Mower unit with swath discs 1)
If a conditioner is not attached to the mower unit then the swath
former can be attached for mowing.
- The swath former is fixed to the same holding brackets as the
conditioner (11a = left and right spring pin).
Setting both tension springs
A = for high dense
forage
B = basic setting
C = for short forage
Setting both rubber discs
24 / 13 x 2
25,2 / 34 x 1
M12 x 30
0 - 10 mm 0 - 10 mm
TD 49/97/2
M12 A 12
TD59/96/7a
M1
M2
15 mm
115 mm
TD 79/98/44
S