Poettinger MULTICAT 9000, Руководство по эксплуатации

Страница: 10 / 35

GB
TRANSPORT POSITION
WORKING POSITION
- 10 -
9800-GB TRANSPORT (374)
Driving on public roads
• Observe the official regulations of your country.
• Travelling on open roads may only be carried out as described
in chapter "Transport position".
• Protection devices must be in proper condition.
• Before travelling bring all swivelling parts into their correct
positions and secure against dangerous changes to position.
• Check that lighting functions before travelling.
• Important information can also be found in the supplement
ofthis operating manual.
Conversion from working to transport position
Safety Precaution!
see supplement-A1 points 7.), 8c. - 8h.)
• Changing from working position to transport position
is only to be carried out on even, firm ground.
• Make sure that swivel area is free and that nobody is
standing in the danger area.
1. Raise side guards (1)
- otherwise the overall length is more than 3 m.
2. Raise centre cutter bar completely (H1)
- use the appertaining single-action control valve (EW) for this.
3. Raise both outside cutter bars slightly (H2)
- use the appertaining single-action control valve (EW) for this.
4. Swing both external cutter bars under the centre cutter
bar (H3)
- use the appertaining double-action control valve (EW) for this.
5. Raise both cutter bars completely
TD 79/98/02
1
TD 79/98/03
H1
TD 79/98/04
H2 H2
TD 79/98/07
H3 H3