
E-mail: [email protected]
Website: www.tamson.com
van 't Hoffstraat 12
2665 JL Bleiswijk, THE NETHERLANDS
T. 31 (0) 10 522 43 73
ttu-tb-tlb-tlc.docx Rev. 1.04 UK 0720
Tamson Instruments B.V.
Page 24/39
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
ISO 9001 : 2015
NL/PRO 238239125
the menu. After switching off the power supply, changed
values are kept in memory.
8.3.3 DISPLAY READOUT
[1]
Temperature readout
[2]
Applied percentage of power
[3]
Operating mode
[4]
Indicator, alarm high, alarm low, control stable
Ad 1: When the controller starts or is restarted, the
displayed value increases to a stable readout
appears after a few seconds.
Ad 2: The controller calculates every second the amount
of power which should be applied for stable control.
The value is displayed with a resolution of 0.1%
and ranges from 0% to 99.9%.
Ad 3: Boost
Bath is heating to set point
Cooling
Bath is cooling down to set point
Tuning Ratio
Bath is tuning for power needed
Tuning SA
Bath is tuning, second step
PID SP=25.00 Bath is controlling, set point is
25.00°C (example)
Ad 4:
-
Bath control is stable
Optional:
-
Alarm high, press button to reset
-
Alarm low, press button to reset
8.4
MENU ITEMS
Use the front panel buttons and to select a menu. After
pressing a sign appears next to the value indicating
the value can now be changed. Pressing the up or down
button again activates the value immediately. When the
value is changed the value can be accepted bij pressing
The new value will be accepted. When not pressing the
value will be stored automatically after 5 seconds. The
display than
returns back to normal operating mode.
MENU ITEM "SETPOINT"
Select the set point temperature. Resolution is 0.01°C
MENU ITEM "OFFSET"
1
3
2
4