Plus UPIC-56M, Инструкция по эксплуатации системы

Страница: 26 / 43

Changing the calibration setting
Change the connection detection method when the projector has been moved or the size
of the projected image is changed.
1
With the mouse, right-click on the
UPIC Utility icon in the computer’s
task tray. A pop-up menu appears.
2
Select the desired item from the menu
to change the setting and calibrate.
Calibration
The calibration patterns appear if the position has not been cali-
brated. For instructions on calibrating, see page 25. (Default)
Calibration at Startup
When connection of the digital pen is detected, the calibration
patterns appear.
The operation changes by switching the calibration operation
setting check button on and off.
On (default): Calibration is performed each time at startup.
Select Monitor
The window for selecting the number of the monitor connected
to the projector is displayed.
Select the number of the monitor connected to the projector.
By default, searching is performed with the monitor number set
to “Display 1”.
Help
Display the UPIC Utility’s help file.
Exit
Quit UPIC Utility.
• The pattern that is flashing switches in the fol-
lowing order as the patterns are touched:
Top left → Bottom left → Bottom right → Top
right
Once a pattern has been touched, it turns gray.
This completes the calibration procedure.
Next, start up UPIC Touch&Draw. (See page 27.)