Plus UPIC-56M, Инструкция по эксплуатации системы

Страница: 11 / 43

Operation of the digital pen and indicator
When using for the first time, you must pair the computer and digital pen.
* Pairing refers to establishing the wireless connection between the computer and digital pen.
See “Pairing the digital pen and computer” on page 20.
1. When the cap is removed, the digital pen’s power turns on (the indicator flashes) and connection to
the computer begins.
2. Once the connection is completed, the indicator turns off and the pen input standby mode is set.
In this mode, the digital pen can be used to draw and click.
3. When the cap is put on, the power turns off.
NOTICE
Check that the digital pen is properly registered on the computer, that the digital pen is not too far
from the computer (within 10 meters), and that the digital pen’s battery is not worn out (the pen’s
indicator flashes slowly). If the battery is worn out, the software’s icon in the computer’s task tray
changes. Check the battery power on the display that appears when the icon is clicked.
Cautions on Use
• Do not place the digital pen at an excessively strong angle when drawing, or it will not be able to
properly read the coordinates.
• Do not leave the digital pen’s cap off. Doing so will wear down the battery.
• Do not try to use the digital pen with the stylus removed. The pen will not operate unless the
stylus is mounted.
•
Pen cap
This protects the digital pen and turns its power on and off.
The power turns on when the cap is taken off the tip of the
pen and turns off when the cap is put on.
Indicator
The indicator lights or flashes to indicate the digital pen’s
connection, standby status, etc.
Battery cover
Remove this to change the battery.
Power on/off notch
When the cap is put on, the notch is pressed in, turning the
power off.
NOTE Be careful not to press the notch by mistake
when using the pen. Doing so will turn the power
off.
Infrared reading sensor
This reads the coordinates printed on the panel.
Stylus
This is linked to the pen pressure sensor.
Digital pen
This is the writing tool for drawing on the panel. When drawing on the panel, the position
and pen pressure information is transmitted wirelessly to the computer in real time.