Plus UPIC-56M, Инструкция по эксплуатации системы

Страница: 13 / 43

Flow of preparations prior to using the wireless interactive panel and when quitting
NOTICE
When using a computer on which steps 1 and 2 have been completed, start the preparations
from step 3.
1
Install on the computer UPIC Utility and UPIC Touch&Draw from the
included CD-ROM. (See page .)
2
Make the computer recognize the digital pen (pairing). (See page
0.)
* A commercially available Bluetooth USB adapter is required if the computer is not
equipped with the Bluetooth function.
3
Install the wireless interactive panel. (See page .)
4
Connect the computer and projector. (See page .)
5
Calibrate the positions of the computer and projector. (See page .)
The wireless interactive panel can now be used.
6
Start up the software. (See page .)
On the computer, select [Start]
→
[All Programs]
→
[UPIC]
→
[UPIC Touch&Draw] to start up
the software.
Once you are finished using the wireless interactive panel
. Close the software. (See page .)
. Put the cap on the digital pen.
The digital pen’s power turns off.
. Shut down the computer.
. Turn off the projector’s power.
Moving and storing
. Disconnect the computer and projector.
. Put away the wireless interactive panel. (See page .)
•
•