Plus NF-20, Руководство пользователя

Страница: 45 / 54

E-45
Prepare the printer. (See the previous page.)
Note
• When turning on the power, wait about 5 seconds or more after the
power plug has been connected before pressing the ON/Standby
button.
• Press the ON/Standby button to switch on the power. The LED of the
display window will light.
• Turn on the NETWORK FLIPCHART’s power before turning on the print-
er’s power.
Press the ON/Standby button and switch on the power.
Press the Scroll/Stop button and display the sheet sur-
face you want to print.
When the Scroll/Stop button is pressed, the sheet surface scrolls one
screen’s worth to the left (to the next screen) and stops automatically.
Note
• To display the next screen, press the Scroll/Stop button after scrolling
stops. If the button is pressed during scrolling, scrolling stops immedi-
ately. When pressed again, the sheet is scrolled one screen’s worth from
the point at which it stopped.
• The one-screen that is visible is printable position.
• To fine-adjust the sheet surface position, with the sheet stopped, move
the sheet slowly by hand. The sheet can be moved either to the left or to
the right.
• Printing of the portion located around the sheet surface might not be
possible. Please see “Effective reading size” on Page E-5.
Basic Printing Operation
Preparation:
Preparation: Check that the AC power plugs of the NETWORK FLIPCHART and printer
are connected to wall power outlets.
Printing
There are two screens.
Model name: NF-20
continued on next page