Plus NF-20, Руководство пользователя

Страница: 18 / 54

E-18
IP Address=*
Subnet Mask=*
Default Gateway=* Input the IP address (fixed).
Input the subnet mask.
Input the default gateway if necessary.
Contents upon purchase and when network settings are reset
Item Item name Setting Default
IP address IP Address Any value Blank
Subnet mask Subnet Mask Any value Blank
Default gateway Default Gateway Any value Blank
Save the “setting.ini” settings file, overwriting the previous
file.
Save to location: “setup” folder on NETWORK FLIPCHART (removable disk)
File name: setting.ini
• We recommend making a note of changed settings for future reference.
Once overwriting is completed, the NETWORK FLIPCHART
reboots automatically.
Perform the USB disconnection procedure on the computer (see step 3 on
page E-43), then disconnect the USB cable.
Check the connection.
1 Connect a network device such as a switching hub to the main
device by connecting it to the LAN port on the main device using a
LAN cable commercially available.
2 Launch a web browser (ex.: Internet Explorer) on a computer con-
nected to network.
3 In the address field, input “http://” followed by the IP address that
was set, then press the [Enter] key.
If the NETWORK FLIPCHART’s top screen opens, the NETWORK
FLIPCHART has been correctly connected to network.
If the NETWORK FLIPCHART’s top screen does not
open
This could be due to one of the following:
• Have you made a mistake inputting the IP address that was set?
• Is the NETWORK FLIPCHART’s LAN terminal properly connected
to a LAN port on the network?
• Is the IP address that was set being used by another device?
• If multiple units of this NETWORK FLIPCHART are connected, are
they connected to the network with the same IP address?
• Is the IP address that was set within the automatic acquisition
range of the DHCP of the router, etc.?
• When using a proxy server, add the NETWORK FLIPCHART’s IP
address to the “Exceptions” in the proxy’s settings to set so that
the proxy is not used.
CB Setup and Network Setting Procedure