plumBOSS Australia Head Office - Ph: 1300 331 141 | Fax: 1300 764 510 | E: [email protected]
exactCUT P400 Operating Instructions
Information
Noise/Vibration Information
Measured values determined according to EN60745-1:2009 + A11:210 ja EN60745-2-3:210.
Wear hearing protection!
The test was performed using Ø200 mm PVC pipe that has 5.9mm thick wall.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may signifi cantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Exact PipeCut P400 pipe saw
Package contents:
Please check the package contains the following items
1. Pipecutting shoulder bag
2. Exact PipeCut P400 pipe saw
3. Pipe supports: 1 double and 2 single
4. Operating instructions
5. Allen key 5 mm fixed to the handle
6. TCT blade 150 x 62
fitted on the machine
7. Cut Bevel blade in the bag