plumBOSS Australia Head Office - Ph: 1300 331 141 | Fax: 1300 764 510 | E: [email protected]
exactCUT P400 Operating Instructions
Operating, safety, and servicing instructions
Please read this operating, safety, and servicing instructions carefully before using the pipe saw.
Also store this instruction book somewhere accessible to everyone using the pipe saw. In addition
to these instructions, always follow the official work, health and safety regulations. The Exact
PipeCut is meant for professional use only.
The values given are valid for nominal voltages [U] of 230/240V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual
machines may vary. Only for power tools without reduced starting current: Starting cycles generate brief
voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains
system conditions. Malfunctions are not to be expected for system impedances below 0.36 ohm.
Model
plumBOSS exactCUT P400
Voltage
230V-240 V / 50-60 Hz
Power
1010 W
No-Load speed
4000 rpm
Intermittent operation
S3 25% 10min (2,5 min ON /7,5 min OFF)
Blade diameter
150 mm / 148 mm in the beveling blade
Mounting bore
62 mm
Weight
6,6 kg
Range of use Ø
100 mm –400 mm
Max. pipe wall steel
25 mm cut, 22 mm cut bevel
Spindle lock
Yes
Speed preselection
No
Constant electronic control
No
Overload Protection
Yes
Reduced starting current
No
Vibration
2,6 m/s
2
LWA (sound power)
100 dB
LpA (sound pressure)
89 dB
LpC (highest peak of sound pressure)
103 dB
Technical data