manualshive.com logo in svg

plumBOSS exactCUT P400, Руководство по эксплуатации

Поделиться
Скачать
plumBOSS exactCUT P400 Скачать руководство пользователя страница 5

plumBOSS Australia Head Office -  Ph: 1300 331 141 |  Fax: 1300 764  510 | E: [email protected]

exactCUT P400 Operating Instructions

Contents

6. Technical data

6. Package contents 

7. Safety instructions

10. Functional description and intended use

10. Product features

11. Before operating the tool

11. Connection to the mains power supply

11. Setting the pipe on supports

11. Setting and marking the cutting point

11. To start sawing

12. Piercing the pipe wall

12. Sawing around a pipe

13. Overload protection 

13. Straightness of cut and adjusting wheel

14. Installing and changing the saw blade

14 Service and maintenance instructions

15. Environment/Disposal

15. Guarantee/Guarantee conditions

16. Tips for users 

      Exploded view (separate attachment)

Definitions: Safety guidelines

The definitions below describe the level of severity for each signal word. Please read the 

manual and pay attention to these symbols.

 

 

DANGER

: Indicates an imminently hazardous situation which, if not avoided, will   

  

result in death or serious injury.

 

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could  

  

result in death or serious injury.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not avoided, may   

 

 result in minor or moderate injury.

 

 

NOTICE: 

Indicates a practice not related to personal injury which, if not avoided,   

 

may result in property damage.

 

Denotes

 risk of electric shock.

Содержание exactCUT P400

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды