20 September 2006, Rev 0.01
3-70
MOTORS
3.6.11 FOLD STOP GATE MOTOR M11
Removal
1. Enter A3 size (11x17”).
2. Disconnect connectors [A] (
x3 ).
3. Remove screw [B] and remove sensor [C] ( x1 ).
4. Loosen screw [D] and remove lever [E]
5. Remove nuts [F] and remove motor bracket [G] (
x2 ).
6. Remove screws [H] and remove motor from bracket ( x3 ).
Installation
1. Reverse the removal procedure.
[F]
[A]
[B]
[C]
[D]
[E]
[G]
[H]
