Replacement
Adjustment
20 September 2006, Rev 0.01
3-33
3.4.17 FOLD ROLLER, LOWER
ASSEMBLIES
Removal
1. Remove outfeed cover (
3.4.4 )
2. Remove chain [A].
3. Remove the two retaining rings [B] (
x2 ).
5. Remove the tension arm assembly [C].
4. Remove the four springs [D].
NOTE:
Use a screw driver as a lever between spring bracket and bearing
bracket to release the spring tension.
6. Remove the two chains [E].
7. Remove the two lower sprockets [F].
NOTE:
There are shim washers by the sprockets. Note their position and
quantity for installation.
8. Lift up the paper guide between lower and upper fold rollers.
9. Pull out the fold roller through the inside of the machine.
10. Pull out the other fold roller through the fold area of the machine.
Installation
1. Reverse the removal procedure
[B]
[A]
[E]
[C]
[F]
[C]
[D]
