Platinum Curve Stairlift, Руководство по установке, Страница: 8 / 44

8
Typical Kitting List
A typical installation will use the following numbers of these parts:

Leg bases (number specified on the Installation Drawing)

Track sections (number specified on the installation drawing)

45mm long spirol pins for legs (two per leg)

40mm spirol pins for track joints (2 per Joint)

6.3mm by 30mm screws (4 per leg, plus brown Rawlplugs if a
concrete/marble/stone staircase)

M6 by 40mm rack jointing bolts and M6 nuts (1 set per joint)

2 x End Stop/Charging Assemblies

6 x M5 x 10 buttonhead cap screws

2 x Red spade crimp connectors

2 x Red ring crimp connectors

White 2-core 0.5 sq mm cable (track 4 metres)

2 x cable grommets

4 x Track End Bungs

Leg Top bungs (1 per leg)

1 x PSU and plug

2 x Remote Controls, labels and holsters (unless more requested)

Red Rawlplugs (3 per wall control, 2 per charger)

8 x 1 Pozidrive wood screws (3 per wall control, 2 per charger)

2 x 9v PP3 batteries

2 x 12v 8.5 aH chair batteries

8 x 100 x 2.5 natural tie wraps

2 x self-adhesive cable clips

Installation Drawing

Chair top (check controls are on correct side)

Carriage

Silicone or synthetic PTFE Lubricant for the racking

1 x Manual Winding Handle (to be left with the user)

1 x User Guide (to be left with the user)