Platinum Curve Stairlift Скачать руководство пользователя страница 35

 

 

 

 

 

 

 

 

   

35

 

 

Technical Information 

Weight Limits 

The stairlift has been designed to carry one person only, in a seated 
position. The standard stairlift has a maximum weight limit of 120kg (19 
stone) and the heavy duty stairlift has a maximum weight limit of 160kg (25 
stone). 

Operating Periods/Excessive Use 

The stairlift has been designed to run for four minutes with a break of at 
least six minutes afterwards. If you use the stairlift too often without taking a 
break, the motor will not cool down between journeys and may become 
damaged. 

Replacement Batteries 

We recommend that the batteries in each remote control are renewed at 
least every six months. This is the resposibilty of the user, 

Maintenance 

To maintain safe and reliable operation, the standard stairlift needs a 
annual safety inspection and service. The heavy duty stairlift requires a 
service every 6 months. 

 

C

AUTION

Modifications which have not been expressly approved by the 
manufacturer may void the warranty and may cause damage. 
Your stairlift should be inspected and maintained by a Platinum 
approved service engineer. 

Hand Winding the Stairlift 

If necessary, for example to release the safety gear after the OSG has 
activated or to return the carriage from an over-run position, the stairlift can 
be manually hand-wound using the supplied winding handle. 

If the OSG has been activated, the carriage should only be hand-
wound in the upwards direction. 

The batteries must be connected to release the brake before winding. 

To hand-wind the stairlift: 

 

Switch the On/Off switch (11) to the ‘0’ (Off) position. 

 

Fully insert the winding handle into the Emergency Hand Wind 
Mechanism Socket (5)  and push in until it clicks, releasing the brake. 

 

Keeping the handle fully inserted, carefully rotate it as needed. 
If you rotate the handle clockwise, this will move the chair to the right. 
If you rotate the handle anti-clockwise, this will move the chair to the 
left. 

 

Never use the stairlift when the winding handle is in the socket.

 

Upholstery 

Carelessness with matches, cigarettes and so on can cause a fire. The 
upholstery material used on your stairlift has been tested for compliance 
with BS5852. 

Содержание Curve Stairlift













































Отзывы: