Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
49
8.3. Moving, long term stop and disposal of the sterilizer
When the STERLINK
®
FPS-15s Plus sterilizer system is reinstalled from initial place to the
another, the system shall be moved by the authorized technicians. If there is no continuous
sterilization cycle, it is required to turn off the power switch of the sterilizer and pull out the
power cord from the power outlet with following storage condition.
Name
Value
Humidity
30-85%
Atmosphere pressure
70–106 kPa
Temperature
10-40
℃
When the system is reactivated after long stop, the user shall contact the manufacturer of the
sterilization system and the authorized person of the manufacturer to take a proper instruction.
Moreover, the equipment shall not be reinstalled where the power cord is difficult to handle.
In the event that disposal of the system is necessary, the system may be return to the
manufacturer, recycled with a local recycler, or disposed of in a local landfill. Disposal of
infectious waste and electronic circuit boards are regulated by the U.S. Environment Protection
Agency and most international environmental agencies. Please contact Plasmapp or your local
Plasmapp customer support representative for additional information.
