Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
41
CAUTION! PRODUCT MANAGER ACCESS AUTHORIZATION.
Only administrators who had a training for the sterilizer product can use the function
“Door open” and “Pump Heating” if the door cannot be opened or the pump doesn’t
work.
Notes.
∎
The lifetime of the touch screen backlight can be considerably increased if the sterilizer
automatically turns it off when it is not in use.
∎
The time required to turn off the power is 15 minutes which is the factory default setting.
∎
When the venting filter is contaminated or blocked with other objects, the venting process
can be failed and door cannot be opened. When it occurs, this “Door open” can be used to
open the door. Note that this key is activating addition venting and it can take about 10 sec.
It the problems persist, please contact Plasmapp or your local Plasmapp customer support
representative.
∎
If the oil of vacuum pump is not replaced regularly, not used for a long time or the use
frequency is lower than the standard mentioned is Chapter 8 “Maintenance” it may not
work properly, the function “Pump heating” can resolve this problem. It can take about 10
minutes. It the problems persist, please contact Plasmapp or your local Plasmapp customer
support representative.
