Planmeca Compact i5, Руководство пользователя

Страница: 168 / 326

23.7.1 Speed/power
Standard pedal: To drive the instrument, push the foot control pedal to the
right or to the left.
Wide pedal: To drive the instrument, push the foot control pedal down.
Pushing the pedal further to the right/left or down will increase the speed or
power of the instrument. As you push the pedal, the power output is
displayed on the control panel. The normal range is 5 - 100%.
To stop the instrument, allow the pedal to return to the rest position.
CAUTION
Ensure that the pedal is in rest position when you activate the instrument.
NOTE
The speed/power level depends on the instrument.
23.7.2 Quickstart
The turbine will start with maximum speed if the quickstart is enabled.
When quickstart is enabled, the indicator light on the control panel button is
green.
Control panel: When the instrument is active, but not operated, press
Quickstart to enable/disable the quickstart.
NOTE
The foot control can be configured so that you push the left-side knob down
to enable/disable the quickstart. Contact your Planmeca dealer.
NOTE
Check the indicator light on the control panel to verify that pushing the left-
side knob down activates the correct function.
23.7.3 Instrument spray
The instrument cooling spray setting can be selected to be water & air, air or
no spray.
The spray flow rate can be programmed. See section "Instrument spray" on
page 181.
The amounts of water and air for the currently used spray type are displayed
on the control panel.
23 Operating instruments
158 Planmeca Compact i User's manual