12
Gas cylinder connection
Twist-on connection
Quick-release
1.
Check if the bottle valve is TURNED OFF turning it
clockwise
2.
Remove the protection tip and store it for later use.
1.
Remove the protection tip. Do not use any tools,
leave the tip hanging freely.
3.
Before making the connection check if the black seal
is not damaged.
2.
Make sure all the taps on the gas device are closed
and if the switch in in the OFF position.
4.
Fit the connecting nut to the cylinder with the use of
a correct wrench or the connecting knob. (left
thread) Do not allow the gas cylinder connectors to
be fastened too tightly.
3.
Place the quick-release regulator on the valve and
press it down hard. If the switch is correctly turned
off you will hear a characteristic click.
5.
When the gas flow is required turn the valve of the
bottle counter-clockwise.
4.
To let the gas flow in turn the switch into the ON
position (or into the flame image).
Table 1
–
Gas cylinder connection
•
Place the gas cylinder in a correct distance from the fireplace (min 1,5 metres away).
WARNING!
Check the gas connection for leakage. If anything suggests a leak is present (for instance a characteristic
gas smell) close the gas cylinder valve and under no circumstances turn the device on before removing the leak.
•
After removing the leak one may open the gas cylinder valve again.
