Planika Galaxy Burner Скачать руководство пользователя

Страница: 3 / 26

INTRODUCTION

The Galaxy Burner fireplace is a decorative fuel-effect gas appliances intended only for outdoor use. It is obligatory to

acquaint o

neself with the below installation manual and user’s manual before committing to the installation and use

of the Galaxy Burner fireplace. This manual is to be kept safe for the lifetime of the device.

The Planika company designs and manufactures gas devices that meet the highest standards of quality, and safety.

The device has a CE marking, which means that it meets the essential requirements of the Regulation (EU) 2016/426

relating to Devices burning gas and EN 778: 2010.

Each gas fireplace produced by Planika is subjected to factory quality control, during which it undergoes rigorous safety

tests. Materials of the highest quality used for its production guarantee the user a smooth and reliable functioning of

the device.

The device is delivered together with the instruction manual and assembly instructions. The assembly instructions

provide the necessary information to install the device in such a way that it works properly and safely. In addition, you

can find technical data about the device, information on its maintenance and possible failures that may occur, along

with their possible causes and how to resolve them.

WARNING!

The device must be installed by the installer who is certified and qualified specialist in gas heating and

electricity and should have all the qualifications required by local law. Failing to comply with the above condition
may result in voiding the warranty.

CE Declaration of conformity

We hereby declare that both the design and construction of a gas heating device manufactured by

Planika Sp. z o.o. (with registered office at

Bydgoskich Przemysłowców 10 85

-862 Bydgoszcz, Poland

) meet the essential requirements contained in the Directive and the Ordinance on

gas appliances.

Product

: Gas device with decorative combustion effect and atmospheric burner,

Type

: Galio

Regulation

: 2016/426/EU

Standards

: PN-EN 778: 2010; PN-EN 437:2019-03; PN-EN 60335-2-102

Model

Galio Fire Pit

GALIO 700-950

GALIO 1000-1150

GALIO 1200-1550

GALIO 1600-2150

GALIO 2200-2500

Type

VEGA/400

SIGA/01

SIGA/02

SIGA/03

SIGA/04

SIGA/05

Series of type

VEGA/400/W/M

SIGA/01/W/M

SIGA/02/W/M

SIGA/03/W/M

SIGA/04/W/M

SIGA/05/W/M

The notified body: the Oil and Gas Institute - National Research Institute (Lubicz 25 A street, 31-

503 Kraków, Unit number: 1450) carried out and

on 09.10.2018 issued the certificate no. GAR1450CT0048 for the above mentioned devices.

The company's quality control system guarantees that the mass-produced devices meet the essential requirements of the applicable Directives

and Regulations as well as the standards contained therein. This Declaration is annulled if any modifications are made to the device without the

prior written consent of Planika.

Brzoza 10.10.2018

Chairman of the Board

Jarosław Dąbrowski

Содержание Galaxy Burner



























Результаты поиска

Содержание Galaxy Burner

Отзывы:

Похожие инструкции для Galaxy Burner

Бренды по названию

Популярные бренды

Planika Galaxy Burner, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание Galaxy Burner

Отзывы:

Похожие инструкции для Galaxy Burner

Бренды по названию

Популярные бренды