23
7.
TESTING
WARNING!
NEVER TURN ON THE DEVICE IF THE CHARACTERISTIC SMELL OF GAS IS PERCEPTIBLE.
If you smell gas during the operation of the fireplace turn off the device immediately and cut off the gas supply from
the gas cylinder by shutting its valve.
7.1.
Checking for gas leaks
•
Check if all connections are airtight.
•
To do that apply all connections with soapy water (or water with another foamy substance) or with a professional
spray for leak detection.
•
If air-bubbles are present that means the connection has a leak.
•
Remove the leaks in the identified spaces.
•
Check for leaks once again.
•
After the inspection dry the inspected connections.
•
The device may only be used again after all leaks are removed.
•
If the problem happens again please contact the dealer.
7.2.
Checking the flame appearance
•
Burn the Galaxy Burner on max flame height and check the appearance of the flame.
•
The flame should be linear and evenly placed on the whole length of the main burner.
•
If visible gaps are present or there are substantial differences in flame height turn off the fireplace and after the
device is cooled adjust the placement of decorative stones in such a way for them to be evenly placed on the
whole surface of the main burner.
WARNING!
Remember not to cover the cover, which houses the ignition and the pilot flame, with stones!
•
Turn on the fireplace and check the appearance of the flame once again.
8.
MAINTENANCE AND UPKEEP
We recommend cleaning the pilot flame and the main burner unit before the device is started again after its been
removed from storage during the winter period.
8.1.
Testing and cleaning
Please check and clean if necessary:
•
The main burner - if necessary, remove broken parts of stones and the existing dust.
•
Pilot burner and thermo-couple (if necessary, remove the existing sediment). In the event of visible damage
contact your dealer.
•
Igniter - gap between igniter and pilot flame should not be bigger than 5 mm.
•
Glass screens
–
check for dirt smudges or possible scratches or cracks. If cracks are present replace the glass
screen for a new one. To conduct this contact your dealer.
•
Gas linkage and pressure regulator (in case their expiry date is invalid replace these ancillaries for new ones).If
you encountered problems with the regulator, gas linkage, burner or regulation valves do not try to fix these
parts. Contact a sales person, an authorised service or an importer in order to acquire spare parts. To ensure the
device is working efficiently use only original spare parts.
