Planex FW-100TX Скачать руководство пользователя страница 8

Страница: 8 / 52

This chapter describes how to install the FW-100TX into a computer and

how to connect a network cable to the Ethernet adapter. Since the adapter

is a PCI bus device, there is no need to manually configure the device. The

computer automatically assigns appropriate I/O base addresses and IRQ at

system startup.

Note:

To avoid damaging the FW-100TX with static electricity, touch the metal

chassis of your computer before proceeding with the installation. After

discharging the static electricity on your body, always make sure to hold

the edge of the board and avoid touching the small components on the

board or the gold colored edge connector.

1. Shut down the computer, and unplug its power cord.

2. Remove the computer's chassis cover. Read the computer's manual for

the procedure.

3. Remove the cover of an unused PCI extension slot.

Note:

The FW-100TX works only in bus master slots. Refer to the computer's

manual to find a slot that supports bus master.

4. Insert the FW-100TX into a PCI extension slot.

5. Fix the adapter into the slot using the screws which held the slot cover.

6. To install multiple adapters, repeat Step 3 through Step 5.

7. Put the chassis cover back on the computer.

The supplied driver diskette contains the following directories. To install

each driver, please see the respective explanation file included in the

diskette.

\FREEBSD

\2.2 FREEBSD 2.2 Driver Description File

\3.0 FREEBSD 3.0 Driver Description File

\LINUX

LINUX Driver Description File

\NETWARE

\ODI

NetWare ODI client driver

\NW311

NetWare 3.11 server driver

\NW312

NetWare 3.12 sever driver

\NW4X

NetWare 4.X server driver

\WIN95

Driver description file for Windows95

\WIN98

Driver description file for Windows98

\WINNT

WindowsNT 3.51/4.0 driver description file

\WFW311

Windows for Workgroups 3.11 driver

\NDIS2

NDIS2.0 driver description file

\DOS

IBM DOS LAN Services driver

\OS2

IBM OS/2 LAN Server 4.0 driver

\MSLANMAN.DOS LAN MANAGER NDIS2.0 DOS driver

\PKTDRV

Packet driver

SETUP.EXE

Diagnostics utility

FW-100TX

Contents of the Driver Diskette

Chapter 2

Adapter Installation

FW-100TX Adapter Installation

Содержание FW-100TX





















































Результаты поиска

Содержание FW-100TX

Отзывы:

Похожие инструкции для FW-100TX

Бренды по названию

Популярные бренды

Planex FW-100TX, Руководство пользователя

Результаты поиска

Содержание FW-100TX

Отзывы:

Похожие инструкции для FW-100TX

Бренды по названию

Популярные бренды