Planex FW-100TX, Руководство пользователя

Страница: 17 / 52

FW-100TX FW-100TX
23
4. Click on the "Detailed Setting" tab.
5. Select "Media Type" from the Property and set "Value". You can choose
one of the following settings.
Auto Sense :
The communication rate (100Base-TX/10Base-T) and the communication
mode (full-duplex/half-duplex) are automatically set by the Auto-
Negotiation function.
100BASETX :
The communication rate will be fixed to 100BASE-TX/half-duplex.
100BASETX Full_Duplex :
The communication rate will be fixed to 100BASE-TX/full-duplex.
10BASET (Twisted_Pair) :
The communication rate will be fixed to 10BASE-T/half-duplex.
10BASET Full Duplex :
The communication rate will be fixed to 10BASE-T/full-duplex.
6. Click on the "OK" button.
7. Click on the "OK" button again. You will be asked to restart the
computer. Click on the "OK" button to restart your computer.
22
2. The system asks you whether you really wish to delete the driver. Click
on the "OK" button to continue.
3. Power off the computer and remove the FW-100TX from the computer.
The initial setting of the communication rate of the FW-100TX Adapter is
configured by Auto-Negotiation (AutoSense). Auto-Negotiation
automatically sets the appropriate communication rate and mode. To change
these settings, follow the procedure below:
1. Double click on the "My Computer" icon and double click on the
"Control Panel" icon.
2. Double click on the "Network" icon.
3. Select "FW-100TX Fast Ethernet Adapter" and click on the "Property"
button.
3
4
Setting the Communication Rate