User’s Manual of IGS-20040MT
33
2.2.3 Wall Mount Plate Mounting
To install the
Industrial Managed Switch
on the wall, please follow the instructions below.
Follow all the DIN-rail installation steps as shown in the example.
Step 1:
Remove the DIN-rail from the
Industrial Managed Switch
. Use the screwdriver to loosen the screws to remove the
DIN-rail.
Step 2:
Place the wall-mount plate on the rear panel of the
Industrial Managed Switch
.
Step 3:
Use the screwdriver to screw the wall mount plate on the
Industrial Managed Switch
.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the
Industrial Managed Switch
on the wall.
Step 5:
To remove the wall mount plate, reverse the steps above.
