User’s Manual of IGS-20040MT
IPv6 / IPv4 Full-functioned Secure Switch for Building Automation Networking
The IGS-20040MT is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch, especially in the
Industrial hardened environment. It supports both IPv4 and IPv6 protocols, advanced Layer 2 to Layer 4 data switching and
redundancy, QoS traffic control, network access control and authentication, and Secure Management features to protect
customer’s industrial and building automation network connectivity with reliable switching recovery capability that is suitable for
implementing fault tolerant and mesh network architectures.
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The IGS-20040MT offers IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses
for the purpose of having a highly-secured, flexible management and simpler networking application.
User-friendly Secure Management
For efficient management, the IGS-20040MT is equipped with console, Web and SNMP management interfaces. With the
built-in web-based management interface, the IGS-20040MT offers an easy-to-use, platform independent management and
configuration facility. The IGS-20040MT supports SNMP and it can be managed via any management software based on
standard of SNMP v1 and v2 protocol. For reducing product learning time, the IGS-20040MT offers Cisco-like command via
Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the IGS-20040MT
offers remote secure management by supporting
SSH
,
SSL
and
SNMPv3
connection which can encrypt the packet content at
each session.
Intelligent SFP Diagnosis Mechanism
The IGS-20040MT supports SFP-
DDM
(
Digital Diagnostic Monitor
) function that can easily monitor real-time parameters of
the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and
transceiver supply voltage.
13
