Planet IGS-20040MT Скачать руководство пользователя страница 129

Страница: 129 / 381

User’s Manual of IGS-20040MT

The page includes the following fields:

Object

Description

To delete a private VLAN entry, check this box. The entry will be deleted during

the next save.



Delete

Indicates the ID of this particular private VLAN.



Private VLAN ID



Port Members

A row of check boxes for each port is displayed for each private VLAN ID. To

include a port in a Private VLAN, check the box. To remove or exclude the port

from the Private VLAN, make sure the box is unchecked. By default, no ports are

members, and all boxes are unchecked.



Adding a New Private

VLAN

Click “Add New Private VLAN” to add a new private VLAN ID. An empty row is

added to the table, and the private VLAN can be configured as needed. The

allowed range for a private VLAN ID is the same as the switch port number

range. Any values outside this range are not accepted, and a warning message

appears. Click "OK" to discard the incorrect entry, or click "Cancel" to return to

the editing and make a correction.

The Private VLAN is enabled when you click "Save".

The “Delete” button can be used to undo the addition of new Private VLANs.

Buttons

: Click to add new VLAN.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the page immediately.

129

Содержание IGS-20040MT






























































































































































































































































































































































































Результаты поиска

Содержание IGS-20040MT

Отзывы:

Похожие инструкции для IGS-20040MT

Бренды по названию

Популярные бренды

Planet IGS-20040MT, Руководство пользователя

Результаты поиска

Содержание IGS-20040MT

Отзывы:

Похожие инструкции для IGS-20040MT

Бренды по названию

Популярные бренды