Planet IGS-20040MT Скачать руководство пользователя страница 141

Страница: 141 / 381

User’s Manual of IGS-20040MT

The page includes the following fields:

Object

Description

To delete a Protocol to Group Name map entry, check this box. The entry will be

deleted on the switch during the next Save.



Delete

Indicates the index of the entry. It is user configurable. It's value ranges from

0-256. If a VCE ID is 0, application will auto-generate the VCE ID for that entry.

Deletion and lookup of IP subnet-based VLAN are based on VCE ID.



VCE ID

Indicates the IP address.



IP Address

Indicates the network mask length.



Mask Length

Indicates the VLAN ID. VLAN ID can be changed for the existing entries.



VLAN ID

A row of check boxes for each port is displayed for each IP subnet-based VLAN

entry. To include a port in a IP subnet-based VLAN, check the box. To remove or

exclude the port from the IP subnet-based VLAN, make sure the box is

unchecked. By default, no ports are members, and all boxes are unchecked.



Port Members

Click “Add New Entry” to add a new IP subnet-based VLAN entry. An empty row

is added to the table, and the IP subnet-based VLAN entry can be configured as

needed. Any IP address/mask can be configured for the IP subnet-based VLAN

entry. Legal values for a VLAN ID are 1 through 4095.

The IP subnet-based VLAN entry is enabled when you click on "Save". The

“Delete: button can be used to undo the addition of new IP subnet-based VLANs.



Adding a New IP

subnet-based VLAN

Buttons

: Click to add a new entry in mapping table.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the page immediately

141

Содержание IGS-20040MT






























































































































































































































































































































































































Результаты поиска

Содержание IGS-20040MT

Отзывы:

Похожие инструкции для IGS-20040MT

Бренды по названию

Популярные бренды

Planet IGS-20040MT, Руководство пользователя

Результаты поиска

Содержание IGS-20040MT

Отзывы:

Похожие инструкции для IGS-20040MT

Бренды по названию

Популярные бренды