manualshive.com logo in svg

Planet Networking & Communication SGSD-1022, Руководство пользователя, Страница: 602 / 688

Поделиться
Скачать
Planet Networking & Communication SGSD-1022 Скачать руководство пользователя страница 602

User’s Manual of SGSD-1022 / SGSD-1022P 

SGSW-2840 / SGSW-2840P 

 

 

602

lldp admin-status   

This command enables LLDP transmit, receive, or transmit and receive mode on the specified port. Use the no form to disable 

this feature.   

Syntax

   

lldp admin-status {rx-only | tx-only | tx-rx} 

no lldp admin-status 

rx-only - Only receive LLDP PDUs.   

tx-only - Only transmit LLDP PDUs.   

tx-rx -Both transmit and receive LLDP Protocol Data Units (PDUs).   

Default Setting

   

tx-rx  

Command Mode

   

Interface Configuration (Ethernet, Port Channel)   

Example

   

 

Console(config)#interface ethernet 1/1 

Console(config-if)#lldp admin-status rx-only 

Console(config-if)# 

 

 

lldp notification   

This command enables the transmission of SNMP trap notifications about LLDP changes.   

Use the no form to disable LLDP notifications.   

Syntax

   

[no] lldp notification   

Default Setting

   

Enabled  

Command Mode

   

Interface Configuration (Ethernet, Port Channel)   

Command Usage

   

•

  This option sends out SNMP trap notifications to designated target stations at the interval specified by the lldp 

notification-interval command (page 4-257). Trap notifications include information about state changes in the LLDP MIB 

(IEEE 802.1AB), or organization-specific LLDP-EXT-DOT1 and LLDP-EXT-DOT3 MIBs.   

•

  SNMP trap destinations are defined using the snmp-server host command (page 4-72).   

•

  Information about additional changes in LLDP neighbors that occur between SNMP notifications is not transmitted. 

Only state changes that exist at the time of a trap notification are included in the transmission. An SNMP agent should 

Содержание SGSD-1022

















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов